科宇系統有限公司

These general-purpose probe holders offer three versions with two different holder tube configurations.

Bent tube at 45 degree angle with either a 45 degree probe tip exit secured by a setscrew or probe tip exit at end (on axis) secured by a set screw on the side.

The third is a straight tube with a probe tip exit at end (on axis) secured with a setscrew on the side.

Specification:
· Tube and tip assembly, 300 series stainless steel
· 22ga. silver plated stranded copper wire with black PTFE insulation
· Standard tested assembly resistance > 0.2 ohms @ 70 degree F
 · Temperature range of probing to 400 degree C · BNC connector, 2 lug male, 50 ohm
 · Accepts Model 7 replaceable probe tips, see probe guide for more information